Finally the cpu cooling fan of my laptop broke after 4 years of heavy functioning.
To install Wireguard on a OpenVZ vps the easiest way is to do the following steps: Step 1: Get a VPS with Ubunbu 20.04 Step 2: Install Boringtun. You will need to be sure the TUN interface is enabled for your VPS in your control panel for your VPS, or this wont work. # apt…
Proceed and disable the following two (2) Update services using registry: 1. Simultaneously press the Windows + R keys to open run command box.2. Type regedit and press Enter. 3. At the left pane, navigate to this key: 4. At the right pane double-click at Start value 5. Set the value data (from “3”) to 4 and click OK. 6. Then at the left pane, navigate to this key: 7. At the right pane…
Reruirements: 1.An authentiacted ssh private key which has been registered in RK’s official repo server. 2.A computer equiped with 100GB hard drive at least has Ubuntu 22.04 operating system. In order to pass the ssh challenge-response verification in repo sync,some important configuration should be added in the ssh config: paste these into config file: After…
# runtime dependencies sudo apt install ffmpeg libsdl2-2.0-0 adb libusb-1.0-0 # client build dependencies sudo apt install gcc git pkg-config meson ninja-build libsdl2-dev \ libavcodec-dev libavdevice-dev libavformat-dev libavutil-dev \ libusb-1.0-0-dev # server build dependencies sudo apt install openjdk-11-jdk # Linux export ANDROID_SDK_ROOT=~/Android/Sdk # Mac export ANDROID_SDK_ROOT=~/Library/Android/sdk # Windows set ANDROID_SDK_ROOT=%LOCALAPPDATA%\Android\sdk meson x –buildtype=release –strip -Db_lto=true…
1.Download and install the Git command line extension. Once downloaded and installed, set up Git LFS for your user account by running: You only need to run this once per user account. 2.In each Git repository where you want to use Git LFS, select the file types you’d like Git LFS to manage (or directly…
Hardware and kernel-level support First, let’s check whether the TPM is correctly recognized by the Linux kernel: I recently got a new laptop equipped with a TPM chip (like almost all new laptops nowadays, as I believe the presence of such a chip is a requirement for the latest versions of Microsoft Windows). I have…
1、看电路图确定GPIO口的序号(例如GPIO2 C3,GPIO2 C4),根据序号推算出实际GPIO数据,在DTS节点中添加对应的GPIO代码GPIO-IO1=<&gpio4 19 GPIO_ACTIVE_HIGH>; 2、在GPIO-CONTROL驱动中添加相对应的处理代码,获取dts中的GPIO口数据,判断是否正常GPIO口,调用GPIO_REQUEST内核获取gpio权限,gpio_direction_output(xxx,1),设置gpio口为输出模式,set_gpio_value(xxx,1),设置为高电平,export_gpio(),导出GPIO口 3、进入ADB判断GPIO口是否导出,cat /sys/class/gpio/gpioxxx/value查看是否高电平,否则重来一遍。
曠怡亭口占
流轉知何世,江山尚此亭。
登臨皆曠士,喪亂有遺經。
已識乾坤大,猶憐草木青。
長空送鳥印,留幻與人靈。